Safety and Compliance Information for Ring Intercom

IMPORTANT PRODUCT INFORMATION

Use Responsibly. Read all instructions and safety information before use.

SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

WARNING: Small parts contained in your device and its accessories may present a choking hazard to small children.

MAINTAINING YOUR RING INTERCOM

Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm.

SAFELY CONNECTING YOUR RING INTERCOM TO YOUR HOME’S ELECTRICAL WIRING

If you install the Ring Intercom where an intercom is already in use and you connect the Ring Intercom to your home’s intercom electrical wiring, you must turn off the existing intercom’s power source at your home’s circuit breaker or fuse and test that the power is off BEFORE removing the existing intercom, installing the Ring Intercom, or touching electrical wires. Failure to turn off circuit breaker or fuse so could result in FIRE, ELECTRIC SHOCK, or OTHER INJURY or DAMAGE.

More than one disconnect switch may be required to turn off the equipment before servicing.

To test whether you have successfully de-energized your existing intercom’s power source, press your intercom several times to confirm that the power is off.

If the electrical wiring in your home does not resemble any of the diagrams or instructions provided with Ring Intercom, if you encounter damaged or unsafe wiring, or if you are unsure or uncomfortable in performing this installation or handling electrical wiring, please consult a qualified electrician in your area.

BATTERY SAFETY

HANDLE WITH CARE. Your device contains a rechargeable lithium-ion battery. Do not disassemble, open, crush, bend, deform, puncture, or shred the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.

Keep the device and its power adapter in a well-ventilated area and away from heat sources, especially when in use or charging. Your device uses the USB cable provided and a USB charger or USB port that is compliant with safety standards, such as IEC 62368. Do not charge your device near water or in extremely humid conditions.

If the adapter or cable appears damaged, discontinue use immediately.

SERVICING YOUR DEVICE

If your device needs service, please contact Ring Customer Support.

Faulty service may void the warranty.

USING YOUR DEVICE AROUND OTHER ELECTRONIC DEVICES

Your device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.

FOR CUSTOMERS IN UNITED STATES

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This Product has been tested and found to comply with the limits for a Class B digital device or external switching power supply, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The Products generate, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device meets the FCC Radio Frequency Emission Guidelines and are certified with the FCC. Information on these Products is on file with the FCC and can be found by inputting such Product's FCC ID (which can be found on the bottom of the device) into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid

The party responsible for FCC compliance is Ring LLC, 12515 Cerise Ave, Hawthorne, CA 90250 USA

To contact Ring about the device’s FCC equipment authorization, please write us at the address

shown above or contact us using the following address: legal@ring.com.

Additional information regarding the Ring Intercom FCC equipment authorization(s) can be found on Ring Help.

Device Name: Ring Intercom

Model: 5F34E9

Information Regarding Exposure to Radio Frequency Energy

The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the device in accordance with your local laws and regulations. For information about recycling, go to amazon.com/devicesupport. For information regarding Amazon’s recycling program, visit https://amazonrecycling-us.re-teck.com/recycling/home

PRODUCT SPECIFICATIONS

Device Name: Ring Intercom

Model Number: 5F34E9

Electrical Rating:4.35VDC 0.75A

Temperature Rating: 32°F to 95°F (0°C to 35°C)

Connectivity:

Wireless features: Single-Band Wifi 2.4GHz; Bluetooth Low Energy; Sub-GHz Radio

ADDITIONAL INFORMATION

You can find the Terms of Use, instructions for using the device, Customer service contact information, and other applicable terms and device information at ring.com/terms

For information on our warranty, visit https://ring.com/warranty