No-Drill Mount for Ring Video Doorbell (2nd Gen) FAQs

Use the renter-friendly Ring No-Drill Mount for Ring Video Doorbell (2nd Generation) if you can't drill holes into your outside wall.

 The No-Drill Mount uses double-sided adhesive to attach the plate to your wall so you can securely screw your Ring Video Doorbell directly onto the mounting plate — no power tools required.

Note: Stick the No-Drill Mount to your wall and hold it against the surface firmly for a few minutes making sure it is firmly and securely attached. Wait a few hours for the tape to adhere to the surface before installing your Ring Video Doorbell (2nd Gen).

Frequently asked questions

Can I use the No-Drill Mount on another model of Ring Video Doorbell?

The No-Drill Mount for Ring Video Doorbell (2nd Generation) will not work with the Ring Video Doorbell (1st Generation) or any other model of Ring Video Doorbell. There is a different No-Drill Mount for Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4 and Battery Doorbell Plus.

Is the No-Drill Mount compatible with the Ring Solar Chargers?

No. The No-Drill Mount cannot be used to mount the Ring Solar Charger for Ring Video Doorbell (2nd Generation).

Is the adhesive tape waterproof?

Yes. The adhesive on the back of the No-Drill Mount will hold even in inclement weather.

How do I remove the No-Drill Mount from the wall?

To remove the No-Drill Mount from the wall for Ring Video Doorbell (2nd Generation), both tapes should be pulled upwards simultaneously. The tapes are normally tucked between the device and adapter plate when not in use.

Can I reuse the adhesive tape?

No. The adhesive tape is designed for one-time use, but the No-Drill Mount does come with additional tapes for re-installation.

What are the best materials to use the No-Drill Mount on?

No-Drill Mount will be most effective on even and smooth surfaces. It may be difficult to adhere to brick, shingles, and rough stucco surfaces. It should not be mounted on glass. In all cases, the wall should be wiped clean before attaching the No-Drill Mount.

What size is the No-Drill Mount?

The No-Drill Mount is 5 inches by 2.5 inches (12.8cm x 6.2 cm). Be sure you have enough room before installing the No-Drill Mount.