Ring Video Doorbell Pro on a modern home's front door.

Installing Wired Doorbell Plus (formerly Video Doorbell Pro) Retrofit Kit

The Retrofit Kit is a mounting plate included in your Ring Wired Doorbell Plus package that allows you to mount your device on the wall by using the holes you created for your original Ring Video Doorbell.

Note: You can prime and paint Retrofit Kit to match your home before installation.

Follow the steps below to replace a Ring Video Doorbell with a Ring Wired Doorbell Plus using the Retrofit Kit.

  • Uninstall your existing Ring Video Doorbell.
  • Place the Retrofit Kit on the mounting holes that were used for your previous Ring Video Doorbell installation.
  • Place the Ring Wired Doorbell Plus over the Retrofit Kit. Make sure that the four pins on the back of the kit are flush against the mounting holes.
    • Note: If the kit will not sit flush against the wall, you can use a pair of pliers to remove one or more of the pins that are preventing it from lying flat.
  • Use the longer screws included in the packaging to secure the Ring Wired Doorbell Plus onto the Retrofit Kit through the mounting holes.
Doorbell and screw image

Last updated 3 months ago