Ring video doorbell on the front door of a modern home.

Top Video Doorbell Tips

Become a Ring Video Doorbell pro with our top two tips to help you keep your device running at peak performance.

Make sure your battery is charged to 100%

Now that you have your Video Doorbell make sure the battery is charged to 100% for at least six to eight hours before installing for the best performance.

Battery-Charging-GiF-Animation1__1_.gif
wifinoise_couch.gif
Charge your battery until the orange light disappears and only the green light is lit.
To remove doorbell faceplate, squeeze  ridges on the sides and lift up from the ridge on the bottom.

Place your wifi router to get the best signal

Give your Video Doorbell the best chance to stay connected to wifi by adjusting your router’s placement at your location. To ensure your router is giving off a clear signal:

  • Make sure your wifi router isn’t blocked behind a couch or in a closet.
  • Move your router off the floor onto a coffee table.
wifinoise_couch.gif
wifinoise_closet.gif
Move your router from behind couch
Move your router out of closet

Learn how to reconnect to wifi

Video Doorbell disconnected from your wifi? No problem. Follow these wifi tips to get it back up and monitoring:

  • Use the same mobile phone you used to set up the doorbell to reconnect.
  • Have your wifi password handy.
  • Remember that wifi passwords are case sensitive.
  • If you didn’t create a new password when you setup your local wifi network through your provider, your password may be printed on the router.

To reconnect to wifi in the Ring app:

  1. Open the
    Ring app
    .
  2. Tap on the
    Menu (☰).
  3. Tap
    Devices
    .
  4. Select your doorbell you’d like to reconnect.
  5. Tap the
    Device Health
    tile on the device dashboard.
  6. Tap
    Reconnect to Wifi
    and follow the prompts to reconnect.

Last updated 1 year ago