Image of the Ring Beacon illuminated with white light at night time.

Setup and Install your Ring Beacon

Safety and compliance information for Ring Beacon

View or download the setup manual for the Ring Beacon.

Install your Ring Beacon with these step-by-step instructions.

Tools Needed:

Illustration of a cross point screwdriver needed for installation.

1. Unscrew to remove the back cover.

Illustration of the Ring Beacon with the back cover being unscrewed and removed.

2. Remove the battery pull-tab.

Illustration showing to remove the battery pull tab from the Ring Beacon before use.

3. Fully charge your sign with a USB-C Cable (not included)

Illustration of a USB cable being plugged into the Ring Beacon to charge the battery.

NOTE: Your light will pulse while charging and glow continuously once fully charged.

4. Download the Ring app.

Illustration of a mobile device showing a download symbol and the Ring logo.

5. Scan the QR code on your device.

Illustration showing to scan the QR code on the device to begin setup.

6. Reattach the back cover.

Illustration showing to reattach the back cover and screw into place

7. Connect your sign to a pole.

Illustration showing to attach the Ring Beacon sign to the pole for installation.

8. Connect the second pole, if necessary.

Illustration showing to attach the Ring Beacon to the additional pole for installation.

9. Connect the stake.

Illustration showing to attach the Ring Beacon to the ground stake installation.

10. Drive the stake into the ground

Note: Push it down with your foot if necessary

Illustration of the Ring Beacon with 2 poles and the stake attached for installation into the ground.

Last updated 4 months ago

Related Articles

    English (US)Change
    ©2026 Ring LLC or its affiliates
    |
    ||