A delivery person pressing Ring Battery Doorbell Plus.

Installing Battery Doorbell

Hardware included

Illustration of the Ring Battery Doorbell Installation Hardware A.

Tools included

Illustration of the Ring Battery Doorbell Push Pin Security Tool.

Tools needed

Illustration of a cross point screwdriver needed for installation.

PH2

Illustration of a power drill to use as an installation tool.

1/4 in (6 mm)

1. Download the Ring app.

2. Scan the QR code.

3. Remove protective film.

4. Fully charge the battery.

Illustration of how to insert the charging cable to charge the Battery Doorbell.

5. Choose a location for your doorbell.

Illustration of a house with a battery doorbell installed at the recommended height of four feet.

Learn how to install a Wedge Kit or Corner Kit to angle your doorbell

Install your doorbell without connecting to an existing chime

6a. Install the mounting bracket. Then, attach your doorbell to the bracket.

Diagram showing different screws and drill needed for concrete, brick, and wood installation surfaces.Attaching mounting bracket to wall with screws and attaching doorbell to mounting bracket.

On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors.

7a. Press until you hear a click to secure.

Illustration of a Battery Doorbell with an arrow to attach secure it to the mounting bracket.

Install your doorbell and connect to an existing chime

6b. Shut off power at the breaker.

Illustration on breaker box with one grey switch showing toggled off.

CAUTION! You’ll be working with electrical wires during the install process. If you are uncomfortable or inexperienced with doing so, consult with a licensed electrician. Do not wire your Ring Doorbell to a DC-powered intercom system.

7b. Install the mounting bracket. Then, connect your doorbell to existing wires and attach.

Diagram showing different screws and drill needed for concrete, brick, and wood installation surfaces.Attaching mounting bracket to wall with screws and attaching wires to doorbell and doorbell to mounting bracket.

On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors.

8b. Press until you hear a click to secure.

Illustration of a Battery Doorbell with an arrow to attach secure it to the mounting bracket.

Remove your doorbell

Insert the removal tool to release the doorbell from the bracket.

Dismount the Ring Battery Doorbell with a Push Pin Security tool.

Last updated 1 week ago

Related Articles

    English (US)Change
    ©2025 Ring LLC or its affiliates
    |
    ||