Smart Lighting setup guide

Follow these steps to set up your Ring Smart Lighting in the Ring app. Learn more about Light Groups in the Ring app.

Pre-setup

Before setting up your Ring Smart Lighting, make sure you have installed and set up your Ring Smart Lighting Bridge.

Smart Lighting Par38 and A19 Smartbulb

Be sure the bulb will be installed in a fixture that does not have an internal dimmer, motion or light sensors, or a built-in timer. Additionally, PAR38 bulbs should not be installed in completely enclosed fixtures. If an A19 bulb is installed outdoors, the fixture must shield the bulb from water.

Watch the video guide for installing Ring Smart Lighting Par38 Smartbulb

Watch the video guide for installing Ring Smart Lighting A19 Smartbulb

Use the below steps to set up your Ring Smart Lighting A19 Smartbulb in the Ring app:

Before setup, make sure the power to the light fixture is turned off.

1. Open the Ring app to the main dashboard.
2. Tap

   Set Up a Device

   at the bottom of the screen.
3. Follow the in-app prompts to complete setup.
   • If your mobile device is not scanning the QR code, tap

     Set up a non-Ring device or choose manually

     to continue through the setup process.
4. Screw in your light bulb.
5. Restore power to the light fixture. Once power is restored, the app will immediately start searching for bulbs and connect to update its firmware.
6. Name your Smart Light Bulb.

Smart Lighting Solar Floodlight

Watch the video guide for installing Ring Smart Lighting Solar Floodlight

Use the below steps to set up your Smart Lighting Solar Floodlight in the Ring app:

Fully charge the Quick Release Battery before initial use.

1. Open the Ring app to the main dashboard.
2. Tap

   Set Up a Device

   at the bottom of the screen.
3. Follow the in-app prompts to complete setup.
4. Insert the Quick Release Battery.
5. Add your Solar Floodlight to a Light Group.
6. Name your Solar Floodlight.
7. Remove the mounting plate and install your Floodlight.
8. Install your Solar Panel.

Smart Lighting Battery and Solar Pathlight

Watch the video guide for installing Ring Smart Lighting Battery Pathlight

Watch the video guide for installing Ring Smart Lighting Solar Pathlight

Use the below steps to set up your Ring Smart Lighting Solar Pathlight in the Ring app:

Fully charge the Quick Release Battery before initial use.

1. Open the Ring app to the main dashboard.
2. Tap

   Set Up a Device

   at the bottom of the screen.
3. Follow the in-app prompts to complete setup.
4. Insert the Quick Release Battery.
5. Add your Solar Floodlight to a Light Group.
6. Name your Solar Floodlight.
7. Remove the mounting plate and install your Floodlight.
8. Install your Solar Panel.

Smart Lighting Battery and Solar Steplight

Watch the video guide for installing Ring Smart Lighting Battery Steplight

Watch the video guide for installing Ring Smart Lighting Solar Steplight

Use the below steps to set up your Smart Lighting Steplight in the Ring app:

Fully charge the Quick Release Battery before initial use.

1. Open the Ring app to the main dashboard.
2. Tap

   Set Up a Device

   at the bottom of the screen.
3. Follow the in-app prompts to complete setup.
4. Insert the Quick Release Battery.
5. Add your Solar Floodlight to a Light Group.
6. Name your Solar Floodlight.
7. Remove the mounting plate and install your Floodlight.
8. Install your Solar Panel.

Smart Lighting Wall Light Solar

Use the below steps to set up your Smart Lighting Wall Light Solar in the Ring app:

Fully charge the Quick Release Battery before initial use.

1. Open the Ring app to the main dashboard.
2. Tap

   Set Up a Device

   at the bottom of the screen.
3. Follow the in-app prompts to complete setup.
4. Insert the Quick Release Battery.
5. Add your Solar Floodlight to a Light Group.
6. Name your Solar Floodlight.
7. Remove the mounting plate and install your Floodlight.
8. Install your Solar Panel.