Ring Video Doorbell mounted on wooden door frame with packages below

Safety and compliance information for Peephole Cam 2K

IMPORTANT PRODUCT INFORMATION

SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING THE DEVICE. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

CAUTION: Risk of fire. Do not install near combustible or flammable surfaces.

WARNING

The inner module of this device, which includes the Quick Release Battery Pack, is designed for indoor use only and must be installed on the interior side of the door. Do not install the inner module in an area exposed to the outdoors.

Do not expose to liquids the inner module of your device which contains the Quick Release Battery Pack and is intended for use only indoors. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device.

Your device uses the USB cable provided and a USB charger or USB port that is compliant with safety standards, such as IEC 62368. Do not charge your device near water or in extremely humid conditions.

BATTERY SAFETY

Keep the device and its power adapter (sold separately) in a well-ventilated area and away from heat sources, especially when in use or charging. For more information about batteries, go to ring.com/legal.

HANDLE WITH CARE. Your device contains lithium-ion rechargeable batteries. Use only the provided charger and charging cables. Use of an unqualified battery or charger might present a risk of fire, explosion, shock, chemical leakage, or other hazard. If battery replacement becomes necessary, use only a new lithium-ion rechargeable battery expressly qualified for use with your device.

Keep all batteries out of reach of children. Do not attempt to open, disassemble, modify, or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water, other liquids, fire, explosion, or other hazards. To avoid short-circuiting a battery, do not allow battery terminals to touch metallic conductive objects or other battery terminals. Avoid dropping the device or battery. Do not crush or puncture the battery. Watch for signs of faulty batteries, including swelling, dents, and tears in the battery wrapper. If you suspect damage to the device or battery, do not attempt repair. Instead, remove batteries from your device and contact Ring Customer Support for assistance.

Only charge your batteries inside a building, in a dry state and using the supplied charging cable.

If the battery compartment does not close securely, stop using the product and keep it away from children.

Other Safety Considerations

Your device can withstand outdoor use and contact with water under certain conditions. However, your device is not intended for underwater use and might experience temporary effects from exposure to water. Do not immerse your device in water. Do not spill any food, oil, lotion, or other abrasive substances on your device. Do not expose your device to pressurized water, high velocity water, or extremely humid conditions (such as a steam room). Do not expose your device or batteries to salt water or other conductive liquids. To protect against electric shock, do not place cord, plug, or device in water or other liquids.

If your device gets wet from immersion in water or high pressure water, carefully disconnect all cables without getting your hands wet and wait for them to dry completely before powering it on again. Do not attempt to dry your device or batteries (if applicable) with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your device or batteries or any wires connected to your device during a lightning storm while your device is powered. If your device or batteries appears to be damaged, discontinue use immediately.

Protect your device from direct sunlight.

Do not install when it is raining.

Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. Use of third-party accessories might impact your device's performance. In limited circumstances, use of third-party accessories might void your device's limited warranty. In addition, use of incompatible third-party accessories might cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using with your device.

WARNING: Small parts contained in your device and its accessories might present a choking hazard to small children.

Protection Against Water

To reduce the risk of damage to your device, follow these instructions:

Do not intentionally immerse your device in water or expose it to seawater, salt water, chlorinated water, or other liquids (such as beverages).

Do not spill any food, oil, lotion, or abrasive substances on your device.

Do not expose your device to pressurized water, high-velocity water, or extremely humid conditions (such as a steam room).

If your device is dropped or otherwise damaged, the waterproofing of the device might be compromised.

For more information concerning care instructions and the waterproofing of your device, please see www.amazon.com/devicesupport.

PRODUCT SPECIFICATIONS

Product: Peephole Cam 2K (2nd Gen)

Model Number: 5DFYA8

Electrical Rating: Ring Battery

Operating Temperature Range: -4°F to 122°F (-20°C to 50°C)

FOR USA CUSTOMERS

Electronic Labeling for Peephole Cam

Certification information regarding your device can be found electronically through the Ring app in the device's Settings Menu under Device Health, Safety, and Compliance Information.

Supplier's Declaration of Conformity

Device Name: Peephole Cam 2K (2nd Gen) Model: 5DFYA8

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party and Party issuing Supplier's Declaration of Conformity: Ring LLC, 12515 Cerise Ave Hawthorne, CA, 90250 U.S.A. www.ring.com / legal@ring.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution, pursuant to Section 15.21 of the FCC rules, user changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with FCC radio frequency radiation exposure limits set forth for an uncontrolled environment. Information is on file with the FCC and can be found by inputting such product's FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other product antenna or transmitter.

FOR CANADIAN CUSTOMERS

Innovation, Science and Economic Development Canada (ISED) Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Information Regarding Exposure to Radio Frequency Energy

This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport.

US Customers: Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. Recyclability of products and packaging materials differs based on jurisdiction. For more recycling information, visit amzn.to/recycle.

Additional Safety and Compliance Information

Additional safety, compliance, recycling, and other important information regarding your device can be found at: www.ring.com/legal

TERMS AND POLICIES

By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms. For other applicable policies, visit ring.com/legal.

LIMITED WARRANTY

For US and Canadian Customers

For information on the Limited Warranty, visit ring.com/legal.

Contact Us

Last updated 0 days ago