Zoekresultaten
Resultaten tonen voor restoren
Installing your Hardwired Transformer Kit
Restore power to the breaker. Now that the new transformer is mounted and wired, it's time to turn the power back on Set up your Ring Video Doorbell Pro. Click here for instructions on setting up the Ring Video Doorbell Pro in your Ring app. Check the voltage In the Ring app, tap your Ring Video Doorbell Pro, then tap Device Health. Check the voltage reading. If it shows "Good: or "Very Good," you're ready to go!
Ring Intercom-set voor videodeurbellen
Mukauta sisäpuhelinpakkausta mukana toimitetulla tarralla. / Når du har tilsluttet din Ring Doorbell, sørg for at der ikke er nogen løse ledninger. Tilpas dit samtaleanlæg med det medfølgende klistermærke. / عدل مظهر عدة الانتركوم الخاصة بك باستخدام بعد توصيل جرس الباب تأكد من عدم وجود أسلاك سائبة غير مستخدمة. الملصق المضمن 8. Restore power at the consumer unit. / Rétablissez l’alimentation du tableau électrique. / Stellen Sie die Stromversorgung am Verteilerkasten wieder her. / Ripristinare l’alimentazione
Technische informatie over Z-Wave voor Ring Alarm
The device’s red LED turns on solid to indicate the device was removed from the network. Ring Alarm Range Extender – Factory Reset Factory Default Instructions 1. To restore Ring Alarm Range Extender to factory default settings, locate the pinhole reset button on the device. This is found on the back of the device after unplugging the device from the outlet.t. 2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds. 3. The device will rapidly blink green continuously for 10 seconds.
De Ring Alarm-contactsensor voor buiten installeren en gebruiken
The device’s red LED turns on solid to indicate the device was removed from the network. Ring Alarm Outdoor Contact Sensor – Factory Reset Factory Default Instructions 1. To restore Ring Alarm Outdoor Contact Sensor to factory default settings, locate the pinhole reset button on the device. This is found on the back of the device after removing the mounting bracket. 2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds. 3. The device will rapidly blink green continuously for 10 seconds.
Handleidingen voor Ring-apparaten
Tilpas dit samtaleanlæg med det medfølgende klistermærke. / عدل مظهر عدة الانتركوم الخاصة بك باستخدام بعد توصيل جرس الباب تأكد من عدم وجود أسلاك سائبة غير مستخدمة. الملصق المضمن 8. Restore power at the consumer unit. / Rétablissez l’alimentation du tableau électrique. / Stellen Sie die Stromversorgung am Verteilerkasten wieder her. / Ripristinare l’alimentazione dal contatore. / Restablece la energía en el cuadro eléctrico. / Schakel de stroom op het verdeelbord weer in. / Gjenopprett strømforsyningen på forbrukerenheten. / Slå på strömmen vid huvudströmbrytaren. / Palauta virta sähkökeskuksesta. / Genopret strømmen til forbrugsenheden. / موزع الكهرباء الاساسي بالوحدة.