Search Results
Showing results for slide-fournies
Installing your Indoor Cam (1st Gen)
...Slide Indoor Cam down to secure it to the wall. Plug it in Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power...
Safety and compliance information for Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...sur la façon d’actionner la garantie de votre Appareil, veuillez contacter l’assistance communautaire Ring en utilisant les coor- données fournies ci-dessous dans la section « Coordonnées ». En général, vous aurez besoin d’envoyer votre Appareil dans son emballage d’origine, ou dans un...
Troubleshooting Ring Alarm Contact Sensors
...as chirps and volume adjustments and reset the device back to the original default settings. Contact Sensor (2nd Gen) and Outdoor Contact Sensor: Slide to remove the Contact Sensor from its base. Use a pin or paperclip to press and hold the pinhole reset button on the back. After the LED light...
Use Bird's Eye Zones for more relevant Motion Alerts
...Use the slider to rotate the map, marking the direction of your camera’s view. Tap Continue . For cameras only: For optimal motion detection, set the correct mounting height and tap Continue . Tap Edit to adjust your zone so it only covers the area you want to monitor...
Installing Outdoor Cam Plus Battery
...7. Attach the camera mount to the back of your camera with its screw. 8. Clasp the camera mount and attach your camera to the mounting plate by sliding until you feel a click. 9. Unclasp the camera mount and tighten the security screw. 10...
Installing Floodlight Cam Wired Plus and Pro
...tighten with the flathead end of the included screwdriver. Then slide the line wire into the bay on the top of the terminal block marked “L” and tighten with the flathead end of the screwdriver. Repeat with the neutral wire, sliding it into the bay marked “N” and tightening with the flathead end...
Ring Alarm (1st Generation) Installation Guide
...Flip the bracket over, then slide it back onto the Keypad. To install the Ring Keypad on a wall: 1. Slide the bracket off the Keypad. 2. Place the mounting bracket on the wall, then use the wall anchors and screws...
Safety and compliance information for Wired Video Doorbell Elite (2nd Gen)
...sur la façon d’actionner la garantie de votre Appareil, veuillez contacter l’assistance communautaire Ring en utilisant les coor- données fournies ci-dessous dans la section « Coordonnées ». En général, vous aurez besoin d’envoyer votre Appareil dans son emballage d’origine, ou dans un...
Troubleshooting tampered Contact Sensors
...Learn how to change your Contact Sensor battery. Carefully slide the Contact Sensor from its mounting bracket. Remove the batteries, wait a few seconds, then reinsert. Make sure that the polarities (+ and -) match up correctly. Slide the cover back on the mounting bracket securely until you hear...
Installing your Stick Up Cam Elite
...before physically installing it. Get instructions on setting up your Stick Up Cam Elite in the Ring app. 1. Slide off the bottom cover The first step in installing your Stick Up Cam is sliding off the bottom cover. Use the orange Ring screwdriver included in your box to remove the security screw...