Search Results
Showing results for extremo-holes
Search instead for extreme-holes
Installing Outdoor Cam Plus Battery
...on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount. 5. Unscrew to detach the camera mount from the battery cover. 6. Remove the rubber cap...
Installing Outdoor Cam
...into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...bottom sections, ensuring it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your...
Installing Battery Doorbell (2nd Gen)
...Installation without an existing chime Choose a location for your doorbell. 2. Use the mounting bracket as a guide to mark screw holes on the wall. 3. Install the mounting bracket directly onto the mounting surface with the included screws. (Optional) On stucco, brick, or concrete...
Installing Solar Charger for battery-powered doorbells
...directly into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the Solar Charger into the wall...
Installing Solar Charger (USB-C) for Battery Doorbells
...doorbell, remove the mounting bracket. 3. Install your solar charger. On stucco, brick, or concrete, use a 0.25 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Optional: Install a wedge or corner kit using its included screws. 5. Install your doorbell’s mounting bracket...
Placing Contact Sensors and Motion Detectors
...sensors: There's nothing more valuable than the security of your home, so try and cover as much of it as possible with motion sensors. The fewer holes you leave for a thief to slip through, the more secure your home will be...
Installing Spotlight Cam Plus or Pro
...on a wood surface : Screw the plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface: Mark four screw holes using the plate as a guide. Drill pilot holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws...
Installing Doorbell Retrofit Kit
...If you’ve accidentally poked incorrect holes, seal them with the included rubber plugs. 5. (Optional) Prime or paint your kit to match your home before installation. 6. Attach the retrofit...
Ring Alarm Z-Wave technical information
...Plug in the Range Extender, making sure the Screw Flange is directly over the wall plate’s screw hole. 3. Secure the Range Extender in place by replacing the wall plate screw. Installation On the Power Outlet (Unsecured) 1. Plug in the Range...