Search Results
Showing results for click
Resetting your Motion Detector after it triggers
...Motion Detector, clear the detection area of anything that might create motion (such as you, your children or your pets) for a full three minutes. Click here for information on proper placement of Motion Detectors...
Charging your Ring Intercom device battery
...is fully charged when the light on the battery shines a solid green. Slide the fully charged battery back into your Ring Intercom device until it clicks into place. Put the cover back on. Your Ring Intercom device will power up and be ready for use. Charging Station for Quick Release Battery Pack...
How Ring protects your accounts from a third party (non-Ring) data breach
...Ring has implemented this extra security check to help protect our customers’ Ring accounts. For more information on creating a secure password, click here. Why do I need to change my password? We work hard to safeguard your account from being accessed by a bad actor that has found matching...
Ring device manuals
...position until you hear a click. Indoor Cam Plus | 9EN 2. To uncover your camera, slide the lens cover to the unlocked position until you hear a click. Removing the lens cover 1. Slide to unlock the lens cover. 2. Lift from the top to detach. 3. Push down and detach from the bottom...
Installing Battery Video Doorbell Plus (2nd Generation)
...9. Reinsert the battery. 10. Reattach the faceplate by pressing until you hear a click. Installation with an existing chime 1. Shut off power at the breaker. NOTE: If you are unsure which breaker to flip, turn off the master breaker...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...6. Turn until your camera locks in place. 7. Tighten the security screw. 8. Install your camera’s decorative cover by sliding until you hear a click to secure. 9...
Installing Spotlight Cam Pro (2nd Gen) PoE
...18. Turn until your camera locks in place. 19. Tighten the security screw. 20. Install your camera’s decorative cover by sliding until you hear a click to secure. 21. Adjust your camera’s position, if necessary. 22. Apply proper silicone or caulk around the junction box knockouts, between the...
Installing your Solar Panel (USB-C) (2nd Gen)
...the bracket to the wall. If mounting to brick, concrete or stucco, use wall anchors and 6mm drill. Slide the Solar Panel onto the bracket until it clicks into place. Loosen the adjustment nut and adjust the positioning as required. Tighten the adjustment nut when positioned...