Search Results
Showing results for attach
Installing and using Ring Alarm Outdoor Contact Sensor
...you plan to install your sensor and magnet are clean and free from dust or dirt. 3. Using the provided double-sided tape, peel the backing and attach the sensor to the mounting location...
Installing Stick Up Cam Pro
...of the camera. 2. Slide the camera with its mount onto the mounting plate. Tighten the security screw on the camera mount so that it’s firmly attached to the mounting plate. 3. Slide the decorative cover back onto the camera mount and click it into place...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...wedge or corner mounts, insert the included screws through both mounts to hold them together. NOTE: We do not recommend using more than two. 5. Attach your doorbell’s mounting bracket over the mount. 6. Refer to your doorbell setup guide to complete setup...
Moving with your Ring devices
...Ring Alarm from your existing Location and set it up at a new Location instead, you’ll lose your settings, and any Ring subscription will remain attached to your old Location...
Installing and using Ring Alarm Keypad
...drywall: Use a 5 mm drill bit to pre-drill holes, then push the anchors into the holes. Use a Phillips-head screwdriver and the included screws to attach the mounting bracket to the wall...
Installing your Indoor Cam (1st Gen)
...the view you want. How to install Indoor Cam on a wall: Remove the base Unscrew it using a standard Phillips-head screwdriver (not included). Re-attach the base Screw it into the back of your Indoor Cam with the “UP” arrow on the bracket pointing upwards. Remove the mounting bracket Slide it down...
Installing Ring Video Doorbell Wired
...You'll know it's ready when it lights up and speaks. 14. Secure your Ring Video Doorbell using screw in bag B Re-attach the faceplate, then use the included screwdriver to drive the small security screw from bag B into the bottom of your Video Doorbell Wired...
Installing DIN Rail Transformer (2nd Gen and 3rd Gen)
...consult with a licensed electrician. 2. Remove your doorbell chime’s cover. 3. Disconnect the wires attached to your chime. 4. Use the included wire nut to connect the wires together. 5. Re-attach your chime’s cover. 6. Locate the existing doorbell transformer. (Optional) Remove the transformer...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...the removal tool into the slot at the bottom of your doorbell. 7. Connect the power cable to your doorbell’s wire terminals. NOTE: You can attach any wire to any terminal. 8. Mount your doorbell by hooking it over the bracket and pushing down. 9. Tighten the security screw. 10. Plug in the...
Pan-Tilt Indoor Cam
...and noise cancellation • Colour Pre-Roll 1 • 2.4 GHz wifi connectivity • Works with Alexa Box Includes • Pan-Tilt Indoor Cam • Privacy cover (attached to camera) • USB-A to USB-C charge cable (3 m) • 10W USB-A power adapter • Mounting plate • Wall mounting bracket • Installation hardware • Setup...
Product