Search Results
Showing results for anchors
Outdoor Cam
...Release Battery Pack • Micro USB charging cable • Wall and table mount/bracket (ceiling mount sold separately as accessory) • Screws and wall anchors • Quick Start Guide • Security sticker Compatible Accessories • Quick Release Battery Pack • Solar Panel (Barrel Plug) • Solar Panel USB-C...
ProductWired Video Doorbell (2nd Gen)
...detection 3 • Pre-Roll • Works With Alexa Box Includes • Wired Video Doorbell (2nd Gen) • Mounting Plate • Installation Hardware (Screws & Anchors) • Bypass Cable • Security Sticker Compatible Accessories • DIN Rail Transformer (2nd Gen) • Plug-In Adapter (2nd Gen) • Wedge Kit • Corner Kit...
ProductInstalling and using Ring Alarm Outdoor Siren
...work; permits and/or professional installation may be required by law. Tools needed: Mounting hardware included with the Outdoor Siren (screws, anchors, and mounting bracket) Ladder or sturdy platform Power drill with 6 mm drill bit compatible with your exterior wall...
Installing your Solar Panel (USB-C) (2nd Gen)
...clips Tools needed Phillips-head screwdriver Drill (optional) Screw the bracket to the wall. If mounting to brick, concrete or stucco, use wall anchors and 6mm drill. Slide the Solar Panel onto the bracket until it clicks into place. Loosen the adjustment nut and adjust the positioning as...
Troubleshooting your Ring Alarm Glass Break Sensor
...added using the Ring app. How to troubleshoot a Glass Break Sensor stuck in 'Tampered' status Make sure you use the included screws (3x21mm) and anchors (5x25mm) to mount the Glass Break Sensor. Check that the mounting bracket isn't warped, bent or damaged. If the mounting bracket appears slightly...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...mark screw holes. 5. Install junction box. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 6. Cover screws with rubber caps. Optional: Use the built-in hooks to hold the S-hook. 7. Connect wires. Fasten earth screw with a minimum...
Installing Spotlight Cam Pro (2nd Gen) PoE
...wall or ceiling with the included screws. On stucco, brick, or concrete, use a 6mm (1/4 inch) masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included rubber caps. 4. Disassemble the cable gland by unscrewing the cap from the body. NOTE: If the...
Ring Alarm Z-Wave technical information
...3. Using the provided double-sided tape, peel the backing and attach the sensor to the mounting location. Screws and anchors are also provided for more permanent mounting. Metal strap ties can be used but are not provided. 4. Follow the same steps for the companion...