Search Results
Showing results for wall
Installing Wedge Kit for Wired Doorbell 4K Pro
...the both top holes or both bottom holes, depending on your desired installation location. 3. Install the mount over your doorbell wires or on the wall with the included screws, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall...
Install and use your Ring Alarm Panic Button
...indicator. Pull to separate, then set the Panic Button aside. Drill pilot holes in the mounting surface using a 3/16” (5mm) drill bit. Insert the wall anchors, then screw in the back cover. Place the Panic Button onto the back cover and twist clockwise so that the lock symbol is aligned with the...
Installing Ring Video Doorbell Wired
...the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11. Connect the doorbell wires Loop one doorbell wire around each...
Installing Wedge Kit for Wired Doorbell 2K Plus
...bit (optional) Refer to your doorbell setup guide to prepare your install location. Use the wedge mount as a guide to mark screw holes on the wall, if necessary. NOTE: Mark the both top holes or both bottom holes, depending on your desired installation location. Install the mount over your...
Install and use your Ring Alarm Range Extender
...is always awake as long as it connected to line power or running on battery. Installation On the Power Outlet (Secured with Screw) 1. Unscrew the wall plate screw adjacent to the outlet the Range Extender will be plugged into. 2. Plug in the Range Extender, making sure the Screw Flange is directly...
Installing Spotlight Cam 2K Battery
...Always Home app. Scan the QR code on your device Choose a location. Wall installation Slide the mounting plate in the direction opposite to the UP arrow to remove. Use the mounting plate as a guide to mark screw holes on the wall with 14 cm of space in every direction. Install the mounting plate...
Installing Wired Doorbell 4K Pro Plug-In
...NOTE: If running the cable through a wall, door, or window, exercise caution for electrical wiring and pipes when drilling. 3. (Optional) If using a corner mount, install the mount over...
Installing Wired Doorbell 2K Plus Plug-In
...We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it...
Installing Spotlight Cam Plus or Pro
...Step 10: Secure any cables and adapters Use provided cable clips to secure any cables to your wall. Use a 6 mm drill bit to pre-drill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick. If using a Plug-In Adapter, you can secure the...
Safety and compliance information for Ring Keypad (1st Generation)
...40°C * Ring Keypad automatically enters “Networked Standby” immediately after active communication is completed. Wall Mounting 1. Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes...