Search Results
Showing results for extreme-holes
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...electrical wiring and pipes when drilling. 3. (Optional) If using a corner mount, install the mount over your doorbell wires using the large oval holes, ensuring it is facing in your desired viewing direction. NOTE: Multiple corner mounts can be stacked together. We do not recommend more than two...
Uninstalling your Door View Cam
...Replace the original peephole Replace the original peephole in the hole in the door. Use your finger to screw in the peephole clockwise as far as it will go. If you don’t have your original peephole you can pick one...
Installing Solar Charger for Battery Doorbells (2026)
...On stucco, brick, or concrete, use a 6 mm (¼ in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing a wedge mount, mount it directly onto your solar charger with the included screws. 5...
Installing Outdoor Cam Pro PoE
...FOR INDOOR USE ONLY Slide the mounting plate in the direction opposite to the UP arrow to remove. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or...
Installing Stick Up Cam Pro
...into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. 1...
Installing Wired Video Doorbell Plus (2nd Gen) Hardwired
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your...
Installing Outdoor Cam Pro Plug-In
...12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. Ceiling installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the...
Placing Contact Sensors and Motion Detectors
...sensors: There's nothing more valuable than the security of your home, so try and cover as much of it as possible with motion sensors. The fewer holes you leave for a thief to slip through, the more secure your home will be...
Installing Solar Charger for battery-powered doorbells
...directly into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the Solar Charger into the wall...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...guide to prepare your install location. 2. Use the wedge mount as a guide to mark screw holes on the wall, if necessary. NOTE: Mark the both top holes or both bottom holes, depending on your desired installation location. 3. Install the mount over your doorbell wires or on the wall with the...