Search Results
Showing results for drill
Installing PoE+ Adapter with Mount
...2. Install the included junction box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included plugs. 4...
Installing Wedge Kit for Wired Video Doorbell Pro (3rd Gen)
...On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 4. If installing multiple wedge or corner mounts, insert the included screws through both mounts to hold them...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Remove the middle rubber cap on the back of your camera. 5. Attach the camera mount to the back of your...
Installing Solar Charger (USB-C) for Battery Doorbells
...Hardware included Tools needed PH2 screwdriver 0.25 inch masonry drill bit and drill 1. Choose a location. If you are in the Northern Hemisphere, direct your solar charger toward the south. If you are in the Southern Hemisphere...
Using the adapter plate included with your Ring Video Doorbell 2
...Ring doorbell and mounting plate, place the adapter plate with it's smaller side (or the beveled edge) facing the wall. 2. Use the original drill holes You can line up the holes in the adapter plate with the holes left behind from your original Ring mounting bracket. Then use the install...
Installing Solar Panel for Battery Doorbells
...On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. 3. Feed the power cable through the doorbell spacer, then secure it in place with the clips on the back. NOTE...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...Doorbell Pro Screwdriver - Use the Phillips end for the mounting screws and star-shaped end for the security screw. Drill bit and anchors - Use a 6mm drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting screws - Use two to...
Installing Wired Doorbell Pro (3rd Gen) Hardwired
...and bottom sections, ensuring it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...The cable can be run through your walls, or through a door or window if desired. Always be careful of existing electrical wiring and pipes when drilling through walls. Attach the wires. Attach the power cables to the terminals on the rear of your Ring Video Doorbell Pro 2. 4. Uninstall your...
Installing Battery Doorbell (2nd Gen)
...Optional) On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 5. Connect the doorbell wiring to your doorbell’s wire terminals. 6. Mount your doorbell by hooking it over...