Search Results
Showing results for wall
Installing battery-powered doorbells
...the Corner Kit using the short bracket screws in bag C. Re-insert the battery into the doorbell. Re-attach the faceplate. Installing directly to a wall / Installing to a Wedge or Corner Kit Doorbells with a built-in battery Secure mounting bracket with the four screws from bag A. Hook the doorbell...
Installing Outdoor Cam
...Do not drill into your home's electrical wiring. If installing on a wood surface , screw the mounting plate directly into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 0.24...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...or as additional trim when upgrading from a conventional doorbell. 3.1 Uninstall your existing doorbell Unscrew your existing doorbell from the wall and disconnect its wires. 3.2 Mark the holes Using your Ring Doorbell as a template, mark the location of the two mounting holes on your wall. 3.3...
Installing Wired Doorbell 4K Pro PoE
...Route the USB-C cable into the wall and through the hole. 6. (Optional) If installing your doorbell without a wedge or corner kit, install the spacer over the USB-C cable and wiring...
Set up and install Ring Intercom Audio or Ring Intercom Video
...Step 4: Mount your Intercom Mount your Ring Intercom device to the wall beside your handset using double-sided tape or screws. For mounting location, make sure you're close enough to connect the cable. Tape mount (for smooth walls): Your device comes with strong tape on the back. This tape works...
Installing Solar Panel for Battery Doorbells
...the cable can reach your doorbell before securing. On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. Solar Panel for Battery Doorbells (2nd Gen) | 6EN 5. Install your doorbell’s mounting bracket. 4. Install the doorbell spacer with the...
Installing Floodlight Cam Wired Pro (2nd Gen)
...to a dimmer switch or timer. Floodlight Cam Pro (2nd Gen) | 3EN Wall installation 1. Remove your existing floodlight and disconnect the wires. 2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 3. Feed the wires through the mounting plate. 4...
Installing Outdoor Cam Plus Battery
...accordingly. 2. Tighten the security screw on the battery cover. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On...
Installing Battery Doorbell 4K Pro
...bit to drill holes for the included wall anchors. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it...
Installing lens cover for Outdoor Cam 4K Pro
...8. Reattach the mounting plate by sliding until you hear a click to secure. 9. Refer to your camera setup guide to attach your camera to the wall. Using the lens cover 1. To cover your camera, slide the lens cover to the locked position until you feel a click. 2. To uncover your camera, slide...