Search Results
Showing results for drill
Installing Wired Video Doorbell Plus (2nd Gen) Hardwired
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with...
Installing Outdoor Cam Pro Plug-In
...12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. Ceiling installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires through the mounting plate. 4. Install the mounting...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...4. Use level and mark screw holes. 5. Install junction box. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 6. Cover screws with rubber caps. Optional: Use the built-in hooks to hold the S-hook. 7. Connect wires...
Installing lens cover for Outdoor Cam Pro
...إلى وضع القفل حتى تشعر بطقطقة. ّ لتغطية الكاميرا، حر Tools needed Phillips-head screwdriver NOTE : Do not use a drill during installation. Using a drill may damage the lens cover or your device. Flat installation FOR INDOOR USE ONLY 1. Slide the mounting plate in the direction opposite to the UP...
Installing Indoor Cam Plus
...holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 4. Plug the power cable into your camera. Note : For best results, use the base clip on your camera to secure...
Installing Ring Video Doorbell Wired
...begin Make sure you have all of the required hardware included in your package: Note: Tools needed for installation (not included): 6mm masonry drill bit (optional) PH2 Phillips Screwdriver 1. Find your doorbell chime Ring your existing doorbell and listen for the chime...
Installing Solar Charger for Battery Doorbells (2026)
...On stucco, brick, or concrete, use a 6 mm (¼ in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing a wedge mount, mount it directly onto your solar charger with the included screws...
Installing Spotlight Cam Plus or Pro
...of the device. Step 10: Secure any cables and adapters Use provided cable clips to secure any cables to your wall. Use a 6 mm drill bit to pre-drill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick...
Installing Floodlight Cam (2nd Gen)
...On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 2. Feed the wires through the mounting plate. 3. Install the mounting plate with the UP arrow pointing up...