Search Results
Showing results for wall
Installing Outdoor Cam 2K | Plug-In
...On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 11. Anchor the power cable to the wall or ceiling with the included cable clips. Outdoor Cam (2nd Gen) | 11EN On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill...
Installing your Pan-Tilt Indoor Cam
...Place your camera on a level surface with 16.5 cm (6.5 inches) of space in every direction and plug in. Wall installation Use the mounting plate as a guide to mark screw holes on the wall with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow...
Installing Indoor Cam 2K
...swivel the base toward the back and tilt your camera up accordingly. Wall Installation Slide the mounting plate in the opposite direction of the UP arrow to remove. Use the mounting plate as a guide to mark screw holes on the wall. Install the mounting plate with the UP arrow pointing up. On stucco...
Installing PoE+ Converter Mount
...to the UP arrow to remove. 2. Use the mounting plate to mark screw holes on the wall. 3. Route the Ethernet cable. Routing the cable through the wall: 3a. Feed the Ethernet cable through the included grommet, then the mounting plate. 3b. Install the mounting plate with the UP arrow pointing up...
Installing Outdoor Cam 2K | Battery
...the Ring Always Home app. Outdoor Cam (2nd Gen) | 4EN 2. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 3. Install the mounting...
Using a Wedge Kit or Corner Kit with your doorbell
...needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 1/4” or 6mm drill bit. Insert the included wall anchors. Step 5: Securing the Wedge or Corner mount onto the wall Warning: Use only the included mounting screws when securing the Wedge or Corner...
Installing PoE+ Adapter with Mount
...if necessary. 4. Plug the other end of the USB-C cable in to your camera until the indicator line disappears. Wall installation FOR INDOOR USE ONLY 1. Install the adapter on the wall with the included screws. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the...
Installing Battery Doorbell 2K
...Installation without an existing chime Choose a location for your doorbell. 2. Use the mounting bracket as a guide to mark screw holes on the wall. 3. Install the mounting bracket directly onto the mounting surface with the included screws. (Optional) On stucco, brick, or concrete, use a 6 mm...
Installing your Indoor Cam (1st Gen)
...it with the included screws. Mount your Cam Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the wall. Plug it in Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power socket...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...the slots on your Corner Mount (fig 1) If you are replacing a Ring doorbell, align the two small screw holes with two of the existing holes in your wall (fig 2). 2. Install the anchors (optional) On stucco, brick, or concrete, use a 6mm masonry bit to drill holes in your wall, then insert the...