Search Results
Showing results for plate
Installing Outdoor Cam
...area. Warning: Only use the included mounting screws when securing the mounting plate, and avoid positions that have electrical wiring behind the plate. Do not drill into your home's electrical wiring. If installing on a wood surface , screw the mounting plate directly into the wall. If installing...
Using the adapter plate included with your Ring Video Doorbell 2
...plate with it's smaller side (or the beveled edge) facing the wall. 2. Use the original drill holes You can line up the holes in the adapter plate with the holes left behind from your original Ring mounting bracket. Then use the install screws to attach the adapter plate to the wall...
Installing your Pan-Tilt Indoor Cam
...you feel a click. Secure your camera and bracket to the mounting plate by sliding until you feel a click. Ceiling installation Use the mounting plate as a guide to mark screw holes on the ceiling with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow...
Installing Stick Up Cam Pro
...If mounting on a ceiling, eave, or overhang , the UP arrow should point away from the area you want to monitor. Step 4: Installing the mounting plate Warning: Only use the included mounting screws when securing the mounting plate, and avoid positions that have electrical wiring behind the plate...
Installing Floodlight Cam Wired Plus and Pro
...Install the mounting plate Run the wires through the hole in the mounting plate. Install the mounting plate with the two posts level with the ground, or level with the wall if mounting on an eave or overhang. Ensure the “UP” arrow is pointing upwards for...
Installing your Indoor Cam (2nd Gen)
...use immediately. Flat installation Wall or ceiling installation Slide down to unhook and remove the mounting plate. Install the mounting plate. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Slide onto mounting plate. Adjust the camera...
Installing Indoor Cam Plus
...plug it into an outlet. Ceiling installation 1. Slide the mounting plate in the opposite direction of the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the ceiling. 3. Install the mounting plate with the UP arrow pointing toward your desired viewing direction. On...
Installing PoE+ Converter Mount
...secure. Installing on a ceiling 1. Slide the mounting plate on your camera’s native mount opposite to the UP arrow to remove. 2. Use the mounting plate to mark screw holes on the ceiling. 3. Route the Ethernet cable. Routing the Ethernet cable through the ceiling: 3a. Feed the Ethernet cable...
Installing Outdoor Cam Pro PoE
...to remove. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. Unscrew to...
Ring Spotlight Cam Battery Installation
...depending on its orientation, allows you to mount it on a wall or under an overhang. To mount your Spotlight Cam on a wall, insert the mounting plate with the ball socket pointing down. To mount on an overhang, insert the mounting plate with the ball socket pointing up. If you need to change the...