Search Results
Showing results for i-anchor
How to install your Ring Video Doorbell Pro with a hardwired transformer
...and star-shaped end for the security screw. Drill bit and anchors - Use a 6mm drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting screws - Use two to mount your Ring Doorbell...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route the Ethernet cable through the slot...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing...
Installing Battery Video Doorbell Plus (2nd Generation)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Install and use your Ring Alarm Panic Button
...then set the Panic Button aside. If installing on drywall, drill pilot holes in the mounting surface using a 5 mm drill bit. Insert the wall anchors. Position the back cover over the anchors and screw it into place. Place the Panic Button onto the back cover and twist clockwise so that the...
Ring Alarm (1st Generation) Installation Guide
...2. Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall. (If using anchors, you should pre-drill holes.) 3. Slide the Keypad onto the bracket. 7. Learn to use Ring Alarm Alarm Modes: Your Alarm system has three Security...
Installing Outdoor Cam Pro Plug-In
...and tighten the security screw. 10. Plug the power adapter into an outlet. 11. Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes...
Safety and compliance information for Ring Keypad (1st Generation)
...then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes). 2. Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm. Declaration of Conformity Hereby, Ring LLC, declares that the radio equipment Ring Keypad...
Installing battery-powered doorbells
...manuals for Ring Video Doorbells. Learn how to install Ring battery-powered doorbells. Hardware included: Mounting screws (A) Mounting anchors (A) Security screw (B) Additionally, some devices come with: Wedge Kit or Corner Kit Short bracket screws (C) Medium corner mounting screws (C...
Installing Indoor Cam Plus
...plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 4. Plug the power cable into your camera. Note : For best results, use the base clip on your camera to secure your cable. 5. Swivel your camera...