Search Results
Showing results for anchors
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...here (set anchor) To install the Corner Mount: 1. Mark two mounting holes on your wall through the slots on your Corner Mount (fig 1) If you are replacing a Ring doorbell, align the two small screw holes with two of the existing holes in your wall (fig 2). 2. Install the anchors (optional) On...
Ring Spotlight Cam Battery Installation
...If installing on a hard surface (such as stucco or brick), use the included drill bit to pre-drill the mounting holes, then insert the wall anchors. If installing on wood or siding, skip this step. Screw in the mounting arm: Drive the included mounting screws into your wall (or the wall...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...and star-shaped end for the security screw. Drill bit and anchors - Use a 6mm drill bit with a power drill to drill holes for the (optional) anchors if installing on concrete, stucco, or brick. Mounting screws - Use two to mount your Ring Doorbell...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route the Ethernet cable through the slot...
Install and use your Ring Alarm Panic Button
...then set the Panic Button aside. If installing on drywall, drill pilot holes in the mounting surface using a 5 mm drill bit. Insert the wall anchors. Position the back cover over the anchors and screw it into place. Place the Panic Button onto the back cover and twist clockwise so that the...
Installing battery-powered doorbells
...manuals for Ring Video Doorbells. Learn how to install Ring battery-powered doorbells. Hardware included: Mounting screws (A) Mounting anchors (A) Security screw (B) Additionally, some devices come with: Wedge Kit or Corner Kit Short bracket screws (C) Medium corner mounting screws (C...
Installing Stick Up Cam Pro
...Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. 1. Screw the mount into the back of the camera. 2. Slide the camera with its mount onto the mounting plate. Tighten the security screw on the...
Installing Outdoor Cam Pro Plug-In
...and tighten the security screw. 10. Plug the power adapter into an outlet. 11. Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing...
Installing Solar Charger for battery-powered doorbells
...through the Solar Charger into the wall anchors. Step 3: Mounting the Solar Charger Screw your Ring Solar Charger onto the wall or into the wall anchors. Then, install any Wedge Kits, Corner Kits, or mounting brackets onto the Solar Charger. Step 4: Connecting the doorbell to the Solar Charger For...