Safety and compliance information for Ring Keypad (2nd Generation)

WARNING! Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.

CAUTION! To reduce the risk of electrical shock, DO NOT open the unit. There are no user serviceable parts inside the unit. Refer to customer support for any repair.

WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.

Ring Keypad is for indoor use only. Do not expose your device to liquids. If your device or adapter gets wet, carefully unplug the device without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. If the device appear damaged, discontinue use immediately. To avoid risk of electric shock, do not touch your device during a lightning storm. When this device is plugged into an electrical socket-outlet, unplugging this device will disconnect it from the AC mains supply. Only plug this device into an easily accessible socket-outlet.

BATTERY SAFETY

HANDLE WITH CARE. Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.

PRODUCT SPECIFICATIONS

Model Number: 5B28S8

Electrical Rating: 5.0V DC 1A

Adaptor Model: DSA-5PF19-05 050100

Adaptor made by: Dee Van Enterprise Co., Ltd.

Temperature Rating: 0°C - 40°C

DECLARATION OF CONFORMITY

Hereby, Ring LLC, declares that the radio equipment Ring Keypad (5B28S8) is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulation, RER 2017 (S.I. 2017/1206), including currently valid amendment(s). The full texts of the declarations of conformity and other applicable statements of compliance for this product are available at the following internet address: www.ring.com/DoC

RADIO FREQUENCY COMPLIANCE

In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.

Wireless Features: Z-Wave

Maximum Effective Radiated Power:

868.40 - 869.85 MHz 3.46 dBm ERP

Power Consumption

* The device automatically goes into networked standby after 1 second of inactivity

Your Ring device uses an external power supply. To view energy efficiency information related to the external power supply click here.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations.