Safety and compliance information for Ring Indoor/Outdoor Power Adapter

Safety Information

DANGER! To reduce the risk of fire or electric shock, follow these instructions carefully.

• Do not force the adapter into an electrical socket.

• Do not expose the adapter or cable to liquids when the indoor plug is fitted.

• The adapter is only rated for outdoor use when the outdoor extension cable is fitted.

• If the adapter or cable appears damaged, discontinue use immediately.

Install your power adapter in an easily accessible socket-outlet located near the equipment that will be plugged into or powered by the adapter.

Your adapter can withstand outdoor use when the outdoor extension cable is fitted and has been tested to withstand water projected through a 6.3mm nozzle at a volume of 12.5 litres per minute and a pressure of 30 kPa at a distance of 3 meters for at least 15 minutes. However, your adapter is not intended for underwater use. To protect against electric shock, do not intentionally submerge or immerse your adapter in water or expose your adapter to other liquids. Do not expose your adapter to pressurised water, high velocity water, or extremely humid conditions (such as a steam room). Do not attempt to dry your adapter with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm while your device is plugged in. For device compatibility information, see the detail page for this adapter on the ring.com website.

Product Specifications

Model Number: E013-1A050250D5

Operating Temperatures: -20°C to 50°C

Power Input: 100-240V 50/60Hz 0.5A

Power Output: 5.0VDC 2.5A 12.5W

Class II Equipment

Find warranty information at: ring.com/warranty.