Safety and compliance information for Ring Video Doorbell Wired

IMPORTANT PRODUCT INFORMATION

Use responsibly. Read all (In-App) instructions and safety information before use. Do not remove sticker yet.

WARNING! Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

WARNING! Only connect to 8-24VAC doorbell transformer or Ring 24VDC Plug in Adapter (2nd Gen) or Ring DIN Rail Transformer (2nd Gen).

WARNING! Some doorbell systems use higher voltage without a transformer. Connecting to these systems WILL DAMAGE YOUR DOORBELL AND POSE RISK OF ELECTRIC SHOCK. If at any point you are unsure how to follow the instructions, STOP and consult a qualified electrician.

WARNING! Electrical shock hazard. Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Installation by a qualified electrician may be required in your area. Refer to your local laws and building regulations before performing electrical work; permits and/or professional installation may be required by law.

WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.

Follow the interactive manual in the Ring app or on ring.com/hardwired.

1. Download the Ring app from the App Store or Google Play Store.

2. Open the Ring app, create an account and select ‘Set up a Device’.

3. Scan the code on the cover page. This identifies your Ring device to make setup fast and easy.

4. Complete your setup. Continue setup in the Ring app, then install your Ring device following the provided instructions.

Do NOT attempt to install your doorbell without consulting the manual. This is for your safety and to prevent inadvertently damaging your doorbell or existing system.

SAFETY INFORMATION

Your device is water resistant and is suitable for outdoor use. However, your device is not intended for underwater use. To protect against electric shock, do not submerge or immerse your device or adapter in water or expose your device or adapter to other liquids. Do not spill any food or beverages on your device or adapter. Do not attempt to clean or polish your device or adapter with or expose your device or adapter to oil, lotion, or other abrasive substances. Do not expose your device or adapter to salt water or other conductive liquids. Do not expose your device or adapter to pressurised water, high velocity water, or extremely humid conditions (such as a steam room). If your device or adapter gets wet from immersion in water or high pressure water, carefully unplug all cables without getting your hands wet and wait for it to dry completely before plugging it in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your device or adapter or any wires connected to your device during a lightning storm while your device or adapter is plugged in. If your device or adapter appears to be damaged, discontinue use immediately.

Protect your device from direct sunlight.Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. Use of third-party accessories may impact your device’s performance and or reliability. In limited circumstances, use of third-party accessories may void your device’s limited warranty. In addition, use of incompatible third party accessories may cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using with your device.

SAFELY CONNECTING YOUR RING VIDEO DOORBELL WIRED TO YOUR HOME’S ELECTRICAL WIRING

If you install the Ring Video Doorbell Wired where a doorbell is already in use and you connect the Ring Video Doorbell Wired to your home’s doorbell electrical wiring, you must turn off the existing doorbell’s power source at your home’s circuit breaker or fuse and test that the power is off BEFORE removing the existing doorbell, installing the Ring Video Doorbell Wired, or touching electrical wires. It is extremely important to adhere to this safety precaution, if there is any natural gas, petrol fumes, or other potentially explosive fumes present in the vicinity. Failure to turn off circuit breaker or fuse so could result in EXPLOSION, FIRE, ELECTRIC SHOCK, OTHER INJURY or PROPERTY DAMAGE.

More than one disconnect switch may be required to turn off the equipment before servicing. To test whether you have successfully de-energised your existing doorbell’s power source, press your doorbell several times to confirm that the power is off.

If the electrical wiring in your home does not resemble any of the diagrams or instructions provided with Ring Video Doorbell Wired, if you encounter damaged or unsafe wiring, or if you are unsure or uncomfortable in performing this installation or handling electrical wiring, please consult a qualified electrician in your area.

Only use accessories that are recommended by the manufacturer. Use of third-party accessories may lead to damage to your Ring Video Doorbell Wired or the accessory and may cause fire, electric shock, or injury. Use of any DC supply not manufactured or certified by Ring will result in damage or lifetime degradation to your device.

See ring.com/hardwired for more details.

PRODUCT SPECIFICATIONS

Device name: Ring Video Doorbell Wired

Model number: 5AT3T5

Temperature rating: -20.5 °C to 48.5 °C

Electrical rating: 8–24 VAC, 10-40VA,

50/60Hz or 24V DC 0.5A*

Wireless features:

• Single-Band wifi (2.4 GHz)

Maximum equivalent isotropically radiated power:

• 2412 - 2472 MHz: 15.30 dBm EIRP

* Only official Ring DC supplies should be used to power this device. Use of any other DC supply will cause damage to your device.

Power Consumption

Mode
Power Consumption (in Watts)
Networked Standby*
1.20

* The device automatically goes into networked standby after 20 minutes of inactivity

Your Ring device uses an external power supply. To view energy efficiency information related to the external power supply click here.

DECLARATION OF CONFORMITY

Hereby, Ring LLC, declares that the radio equipment Ring Video Doorbell Wired (5AT3T5) is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulation, RER 2017 (S.I. 2017/1206), including currently valid amendment(s). The full texts of the declarations of conformity and other applicable statements of compliance for this product are available at the following internet address: www.ring.com/DoC

RADIO FREQUENCY COMPLIANCE

In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.

Last updated 6 months ago