Safety and compliance information for Ring Video Doorbell (2nd Generation)

IMPORTANT PRODUCT INFORMATION

Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.

WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.

SAFETY INFORMATION

Your device is water resistant and is suitable for outdoor use. However, your device is not intended for underwater use. To protect against electric shock, do not intentionally submerge or immerse your device or adapter (not included) in water or expose your device or adapter to other liquids. Do not spill any food or beverages on your device, or adapter. Do not attempt to clean or polish your device or adapter with or expose your device or adapter to oil, lotion, or other abrasive substances. Do not expose your device or adapter to salt water or other conductive liquids. Do not expose your device or adapter to pressurised water, high velocity water, or extremely humid conditions (such as a steam room). If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for it to dry completely before plugging it in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your device or adapter or any wires connected to your device during a lightning storm while your device or adapter is plugged in. If your device or adapter appears to be damaged, discontinue use immediately.

Your device does not contain any serviceable or replaceable parts. Do not open the housing or disassemble the device. Protect your device from direct sunlight. Handle your device and its accessories with care. Your device or its accessories may have pointed edges which can lead to scratches, cuts, or other physical injury.

Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. Use of third-party accessories may impact your device’s performance. In limited circumstances, use of third-party accessories may void your device’s limited warranty. In addition, use of incompatible third party accessories may cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using with your device.

SAFELY CONNECTING YOUR RING VIDEO DOORBELL (2ND GENERATION) TO YOUR HOME’S ELECTRICAL WIRING

WARNING: Electrical shock hazard! Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Installation by a qualified electrician may be required in your area. Refer to your local laws and building regulations before performing electrical work; permits and/or professional installation may be required by law.

WARNING! Some doorbell systems use 230v high voltage without a transformer. Connecting to these systems WILL DAMAGE YOUR DOORBELL AND POSE RISK OF ELECTRIC SHOCK.

If you install Ring Video Doorbell (2nd Generation) where a doorbell is already in use and you connect Ring Video Doorbell (2nd Generation) to your home’s doorbell electrical wiring, you must turn off the existing doorbell’s power source at your home’s circuit breaker or fuse and test that the power is off BEFORE removing the existing doorbell, installing Ring Video Doorbell (2nd Generation), or touching electrical wires. Failure to turn off circuit breaker or fuse could result in FIRE, ELECTRIC SHOCK, or OTHER INJURY or DAMAGE. More than one disconnect switch may be required to turn off the equipment before servicing.

To test whether you have successfully de-energised your existing doorbell’s power source, press your doorbell several times to confirm that the power is off.

If the electrical wiring in your home does not resemble any of the diagrams or instructions provided with Ring Video Doorbell (2nd Generation), if you encounter damaged or unsafe wiring, or if you are unsure or uncomfortable in performing this installation or handling electrical wiring, please consult a qualified electrician in your area.

Only use accessories that are recommended by the manufacturer. Use of third-party accessories may lead to damage to your Ring Video Doorbell (2nd Generation) or the accessory and may cause fire, electric shock, or injury.

BATTERY SAFETY

Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.

Keep the device and its power adapter in a well-ventilated area and away from heat sources, especially when in use or charging. Your device uses the USB cable provided and a USB charger or USB port that is compliant with safety standards, such as IEC 62368. Do not charge your device near water or in extremely humid conditions.

PRODUCT SPECIFICATIONS

Device name: Ring Video Doorbell (2nd Generation)

Model number: 5UM5E5

Temperature rating: -20.5 °C to 48.5 °C

Electrical rating: 8–24 VAC, 40VA max, 50/60Hz for continuous charging

and internal doorbell control or 24V DC 0.5A*

Wireless features:

• 2.4 GHz wifi

• Bluetooth

• Bluetooth Low Energy

Maximum equivalent isotropically radiated power:

• 2412 - 2472 MHz: 18.39 dBm EIRP

• 2402 - 2480 MHz: 6.81 dBm EIRP

* Only official Ring DC supplies should be used to power this device. Use of any other DC supply will cause damage to your device.

DECLARATION OF CONFORMITY

Hereby, Ring LLC, declares that the radio equipment Ring Video Doorbell 2nd Generation (5UM5E5) is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulation, RER 2017 (S.I. 2017/1206), including currently valid amendment(s). The full texts of the declarations of conformity and other applicable statements of compliance for this product are available at the following internet address: www.ring.com/DoC

RADIO FREQUENCY COMPLIANCE

In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.