Resultados de la búsqueda
Mostrando resultados para restore
Prueba a buscar retores
Instalación del kit de interfono para videotimbres
Mukauta sisäpuhelinpakkausta mukana toimitetulla tarralla. / Når du har tilsluttet din Ring Doorbell, sørg for at der ikke er nogen løse ledninger. Tilpas dit samtaleanlæg med det medfølgende klistermærke. / عدل مظهر عدة الانتركوم الخاصة بك باستخدام بعد توصيل جرس الباب تأكد من عدم وجود أسلاك سائبة غير مستخدمة. الملصق المضمن 8. Restore power at the consumer unit. / Rétablissez l’alimentation du tableau électrique. / Stellen Sie die Stromversorgung am Verteilerkasten wieder her. / Ripristinare l’alimentazione dal contatore. /
Información técnica sobre Z-Wave en dispositivos Ring Alarm
This will place the controller into Remove or “Z-Wave Exclusion” mode. 2. With the controller in Remove (Z-Wave Exclusion) mode, use a paper clip or similar object and tap the pinhole reset button. The device’s red LED turns on solid to indicate the device was removed from the network. Ring Alarm Outdoor Contact Sensor – Factory Reset Factory Default Instructions 1. To restore Ring Alarm Outdoor Contact Sensor to factory default settings, locate the pinhole reset button on the device.
Instalación y uso del sensor de contacto de exteriores de Ring Alarm
Ring Alarm Outdoor Contact Sensor – Factory Reset Factory Default Instructions 1. To restore Ring Alarm Outdoor Contact Sensor to factory default settings, locate the pinhole reset button on the device. This is found on the back of the device after removing the mounting bracket. 2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds. 3. The device will rapidly blink green continuously for 10 seconds. After about 10 seconds, when the green blinking stops, release the button.