Search Results
Showing results for install
Installing Wired Video Doorbell Plus (2nd Gen)
...Get step-by-step installation instructions for your Wired Video Doorbell Plus (2nd Gen) Installing Wired Video Doorbell Plus (2nd Gen) Hardwired Installing Wired Video Doorbell Plus (2nd Gen) Plug-In...
Installing Floodlight Cam Wired Pro (2nd Gen)
...Risk of electrical shock. Disconnect power at the fuse or circuit breaker before installing. CAUTION : Risk of fire. Do not install near combustible or flammable surfaces. Note : Your Floodlight Cam must be installed on a 4 in round UL-listed weatherproof electrical box. This manual is for...
Installing No-Drill Mount (2nd Gen) for Battery Video Doorbell (2nd Gen) devices
...doorbell setup guide to reattach the faceplate and secure your doorbell. Removing your mount 1. Remove your doorbell and Wedge or Corner Kit (if installed). 2. Flip down both pull-tabs. 3. Firmly hold the mount and gently pull down on both adhesive strips until the mount releases from the wall...
Installing Spotlight Cam Pro (2nd Gen) Wired
...be connected to the product. DO NOT INSTALL if a working earth connection is not available. • Do not connect this product to a dimmer switch or timer. CAUTION: Risk of fire. Do not install near combustible or flammable surfaces. The Hardwired Kit must be installed on a wall or eave...
Using a Wedge Kit or Corner Kit with your doorbell
...Charger to avoid shadows and maintain optimal sunlight. Installing your Wedge or Corner Kit The Wedge or Corner Kit must be installed before installing your doorbell. Use the installation guide for your doorbell to learn how to properly install your device. Step 1: Remove any doorbells , mounts, and...
Floodlight Cam Installation Guide
...DO NOT INSTALL if a working earth connection is not available. Do not connect this light fixture to a dimmer switch or timer. CAUTION: Risk of fire Do not install near combustible or flammable surfaces.Floodlight Cam must be installed on a wall or eve. Installation steps To install your...
Ring Spotlight Cam Battery Installation
...stucco or brick, use the provided drill bit to make your holes, then insert wall anchors before installing the screws. If installing on a wooden surface, use the install screws to screw the mounting bracket directly into your wall. Mark your holes using the mounting bracket as a guide...
Hardwiring your battery-powered Ring doorbell
...mounting position If using a Wedge Kit, Corner Kit , or mounting bracket with your device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm...
Positioning video doorbells and security cameras
...could cast a shadow on your solar device, such as an extended roof, trees, or bushes. Learn more about installing a solar panel. If you are using a plug-in power adapter with your device: Install your device near a power outlet...
Set up Amazon Key Access (for residents and staff)
...Set up your Amazon Key Access device in the Ring app. Step 1: Install the Ring app Download and install the Ring app: Apple App Store : Ring - Always Home on the App Store Google Play Store : Ring - Always Home - Apps on Google Play...