Search Results
Showing results for install
Installing Outdoor Cam Pro
...Get step-by-step installation instructions for your Outdoor Cam Pro. Installing Outdoor Cam Pro Plug-In Installing Outdoor Cam Pro PoE...
Installing Video Doorbell Pro Retrofit Kit
...of pliers to remove one or more of the pins that are preventing it from lying flat. Use the longer screws included in the packaging to secure the Ring Video Doorbell Pro onto the Retrofit Kit through the mounting holes...
Installing DIN Rail Transformer (2nd Gen and 3rd Gen)
...um die Einrichtung abzuschließen. Follow these step-by-step instructions to install your DIN Rail Transformer (2nd Gen and 3rd Gen). Hardware Included Tools Needed Phillips-head screwdriver Installation 1. Shut off power at the breaker. NOTE: If you are unsure which breaker to flip, turn...
Installing your Hardwired Kit for Spotlight Cam
...3. Cut the grommet The included backbox has two cable inlets with rubber grommets. Choose the inlet that suits your install location, then get out the scissors. Cut off the end of the grommet cone at a point where it’s a bit narrower than your cable. If you’re routing...
Installing Wedge Kit for Wired Video Doorbell Pro (3rd Gen)
...on your desired installation location. 3. Install the mount over your doorbell wires or on the wall with the included screws, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 4. If installing multiple wedge or...
Installing Spotlight Cam Pro (2nd Gen) PoE
...Align the hex joint with the junction box cover mount and insert. 18. Turn until your camera locks in place. 19. Tighten the security screw. 20. Install your camera’s decorative cover by sliding until you hear a click to secure. 21. Adjust your camera’s position, if necessary. 22. Apply proper...
Installing Spotlight Cam Pro (2nd Gen)
...Get step-by-step installation instructions for your Spotlight Cam Pro (2nd Gen). Installing Spotlight Cam Pro (2nd Gen) Plug-In Installing Spotlight Cam Pro (2nd Gen) PoE Installing Spotlight Cam Pro (2nd Gen) Wired...
Installing Ring Door View Cam
...the tube and cable, then slide it towards the hole. If it does not slide in easily, don't force it through. You won't need the adapter. If it does slide in easily, insert the adapter until the rim is flush with your door...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...electrical work; permits and/or professional installation may be required by law. CAUTION: Risk of fire. Do not install near combustible or flammable surfaces. The Hardwired Kit must be installed on a wall or eave. Before you begin installing your Hardwired Kit, make sure that you’re...
Installing Wired Video Doorbell Pro (3rd Gen)
...Get step-by-step installation instructions for your Wired Video Doorbell Pro (3rd Gen) Installing Wired Video Doorbell Pro (3rd Gen) Hardwired Installing Wired Video Doorbell Pro (3rd Gen) Plug-In Installing Wired Doorbell Pro (3rd Gen...