Search Results
Showing results for install
Installing your Stick Up Cam Battery (2nd Gen)
...a shelf or table Place the rubber pad on the bottom of the base. Snap the cover onto the base. Place your Stick Up Cam on a table or shelf. Installing Stick Up Cam on a wall or ceiling If you're mounting Stick Up Cam on a wall: Push the rubber pad into the top of the base. Flip the...
Installing Ring Plug-In Adapter (2nd Generation)
...The device will work with either cable connected to either terminal. Step 4: Install your doorbell Physically install your doorbell. Get instructions for installing your doorbell . Step 5: Plug in the power adapter It might take a moment for your device to power on. You...
Installing Wired Video Doorbell Pro (3rd Gen)
...Install the included transformer. (Optional) Remove the transformer from its housing unit. 8. Connect power to the bottom L & N terminals and the doorbell to positive & negative terminals (doorbell wires can go in either terminal). 9. (Optional) If using a corner mount, install the mount...
Installing Battery Doorbell Pro (2nd Gen)
...using a wedge mount, install the mount on the mounting surface using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing multiple wedge or...
Installing lens cover for Outdoor Cam Pro
...not in use. Lens Cover for Outdoor Cam Pro | 2EN 4. Place your lens cover on your camera in the open position. NOTE: Unplug your power cable, if necessary. 5...
Installing Doorbell Retrofit Kit
...be working with electrical wires during the install process. If you encounter damaged or unsafe wiring, or if you are unsure, uncomfortable, or inexperienced, please consult with a licensed electrician. For Australian and New Zealand Customers Installation and wiring must be performed by a licensed...
Installing Spotlight Cam Plus or Pro
...into your home’s electrical wiring. Choosing mounting plate direction If installing on a wall: Place the plate with the UP arrow pointing up. If installing on an eave or overhang: Place the plate with the UP arrow pointing toward the area you wish to view. Fastening the screws If installing on a...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...to your doorbell setup guide to prepare your install location. 2. Use the wedge mount as a guide to mark screw holes on the wall, if necessary. NOTE: Mark the both top holes or both bottom holes, depending on your desired installation location. 3. Install the mount over your doorbell wires or on the...
Installing Outdoor Cam Plus
...Get step-by-step installation instructions for your Outdoor Cam Plus. Installing Outdoor Cam Plus Battery Installing Outdoor Cam Plus Plug-In Installing Outdoor Cam Plus PoE Note: Outdoor Cam Plus has a larger...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...hole. 5. (Optional) If connecting to an in-home chime, route the doorbell wiring through the hole. 6. (Optional) If installing your doorbell without a wedge or corner kit, install the spacer over the USB-C cable and wiring with the included screws. On stucco, brick, or concrete, use a 6 mm (1/4...